Dimplex XLE125 Heat accumulator 2,76 kW

Dimplex XLE125 Heat accumulator 2,76 kW

The Dimplex XLE sets a new standard for high heat storage in storage heaters and raises the bar above conventional storage heaters. There are 5 XLE models available with outputs from 1.02 to 3.3 kW.

XLE thermal stores offer dynamic accumulation calculation and adjust the amount of energy stored to the user's demand without unnecessary waste. As a result, more electricity can be saved thanks to peak energy.

With the built-in timer that allows heating times and temperatures to be set, users now have more control over their heating. The heat loss that often occurs with conventional storage heaters has also been significantly reduced, so that the room has a pleasant temperature in the morning and there is still enough energy stored to keep warm at night. The technical solution and the modern design make the XLE storage heater a good choice for modern construction to heat residential and commercial spaces.

Two inlets are required for the XLE. One 230V supply for the charging heaters in low tariff and the other unblocked for the fan and control.

Advantages:

• High-quality, elegant white housing.
• Low depth (18,2 cm)
• Advanced control system with weekly/ daily clocks
• LED display
• Precise electronic thermostat
• The "Eco-Start" function determines the switch-on time to reach the desired temperature within a time interval.
• "Open Window" function that automatically reduces the heating power to avoid losses when the windows are opened
• Built-in fan
• Boost mode heats the room to the selected temperature for 1, 2 or 3 hours
• Overheating and freezing protection
• Suitable for wall mounting
• Mounting feet included to distribute the weight after the heater has been mounted on the wall

Parameter:

• 5 models with output: 1,02-3,30 kW.
• High-quality workmanship and attractive appearance (flat design, 182 mm depth).
• Digitally controlled electronic thermostat for stable room temperature.
• Control range from +7°C to +26°C (measuring accuracy +/- 0.2°C)
• 24-hour and 7-day timer for setting heating times and temperatures.
• Operating modes: all-day, holiday, continuous operation: automatic changeover
• Function control for automatic adaptation to the user's requirements.
• "Eco-Start" function - the heater determines the switch-on time to reach the desired temperature within a time interval.
• The "Open Window" function automatically reduces the heat output to prevent heat loss when the windows are open, thus significantly reducing operating costs.
• Electronic and electromechanical overheating protection.
• Colour: white (RAL 9016), white-grey RAL7035 anodised grid.
• IPX4, protection class II.
• Power supply: 1 / N / PE 230-240V / 50Hz.

Regulator functions:

"Open Window", automatic charge control, history/report screens, user-adjustable BOOST mode, thermoregulation, parental control and owner lock (PIN code based)

Overview of the Dimplex XLE storage heaters:

Heat storage units are sophisticated heaters that use a cheaper tariff (2nd tariff) for night charging. They generate heat only where it is needed and only in the amount that is required. Thermal comfort ensures a healthy climate in every room. The principle of storage heating is charging and discharging. The unit collects and stores the heat during the cheaper tariff period (2nd tariff). Then it starts to release the stored heat into the room. The dynamic storage heater releases the heat in a circuit driven by a quiet fan. It blows heat into the room as needed. This method, in combination with a room temperature controller, ensures a high level of thermal comfort.